200tdi ayre
Well-Known Member
Khaos agreed, it is a very wobbily and scary experience 
snaggers110
Well-Known Member
If only I knew then what I know now:hysterically_laughi But that was before I was a member of the Loonyzonewell done then
Muddy Duck
Member
Replacing heater matrix on a Disco 1, what I thought would only be a simple few hours took all day, and all the dash board out...easy enough work, but what a pain! Mind you radio aerial on a Disco was a pain in the bum recently, took a lot longer than the twenty minutes I had planned to do it in. So I guess all jobs on a Land Rover
Trying to find one that isnt a rusty pos
Dave90
Well-Known Member
andlover
New Member
naah, it´s td5... engine is silent but those wondering sounds wich could come from... i dont know :crazy:So much engine noise makes noise diagnostic difficult
Dave90
Well-Known Member
TD5 nice and refined
best thing about the 200tdi is you can't hear any faults, less to worry about 
doodle bug
Well-Known Member
Drilling out the rivets on a 300 tdi vacum pump while its still on the engine !......everything was going great until a mate turned up with 24 bottles of lager... you can guess the rest
you can guess the rest 
andlover
New Member
on discos that is easy... did it 3 times in 6monts
200tdi ayre
Well-Known Member
done a couple of transfer box swaps and removals, although we've got ramps and the gear to do it i can see it being a right PITA if you were doing it on your driveway, wheras i have the kit to remove drop arms and they are still ****ing impossible
