tomcat59alan said:

I thought I would post this as I saw Wammers is up and about, wet the bed again Tony? went to move the black one yesterday to cutback a tree and find the caravan under the green mould. Had the Christmas tree of lights on the was switch,plugged the laptop in and the faults showed were f/l sensor and the usual vehicle has moved. Cleared them still got the lights, went to heights photo 1 and that seems to bear out the f/l sensor / wiring fault. When I went back to faults, what a list, photo 2 until yesterday has sat without loosing height after i replaced all the bags. I've had a lot of bad electrical contact problems with this car as it has sat unused for years. Any thoughts?

Click to expand...

Grrrrrr said:

Never used Storey's EAS unlock software but isn't the full list a sign of bad comms? So either the ODB socket is playing up or maybe the connector behind the A post?

Click to expand...

wammers said:

Think you may have one or two more bad connections Alan. Usually with a list like that it's bad comms with the unit but it's showing good idle. So your guess is as good as mine on this one.

Click to expand...

tomcat59alan said:

Your memory worse than I thought Grrrrrr, I did all 4 A post connectors.Morning mate.

Click to expand...

Grrrrrr said:

Have you not got a Nanocom yet? There's one at St Helens, I think.

Click to expand...

tomcat59alan said:

No mate, wouldn't I need two one for the Gems and one for the oiler?

Click to expand...

Grrrrrr said:

Couldn't remember if you'd done both of them. You've got too many cars.

Good morning indeed. 28 degrees here in the east wing already! Not good for recovering from a skin full.

Click to expand...

tomcat59alan said:

You suverners cannot take your drink, do what we do up here, don't stop drinking and you don't get a hangover.

Click to expand...

supapete said:

Not qualified to join in but I do know about Pooters. My version of easunlock was misbehaving, even showing good idle. I downloaded the latest version and left it where it downloaded to and only opened it from there. Ditch all previous versions and close everything else running. You've probly dun that. Unworthy.

Click to expand...