jonesavpman
New Member
Afternoon all!! I know lots of other threads are similar to my problem but none seem to cover whats up with mine,
Firts off she would sit down overnight, sorted with new rear airbags. she now stays up all week.
i replaced the compressor seal, liner and o rings this afternoon,new inlet filter. seems to be working fine, raises from access height to standard in seconds. extended hieght takes about a minute or so, no idea if thats good or bad?
The issue i have is the pump seems to be running a lot, from starting it will run for about 30 seconds, turn off then restart running after about another 5 secs,and repeating, even without changing height settings. also the valve block is clicking a lot.
Possible valve block leak? Pressure switch? Sensor fault? ive not had any faults appear on switch.
Any thoughts you clever lot?
Thanks
Firts off she would sit down overnight, sorted with new rear airbags. she now stays up all week.
i replaced the compressor seal, liner and o rings this afternoon,new inlet filter. seems to be working fine, raises from access height to standard in seconds. extended hieght takes about a minute or so, no idea if thats good or bad?
The issue i have is the pump seems to be running a lot, from starting it will run for about 30 seconds, turn off then restart running after about another 5 secs,and repeating, even without changing height settings. also the valve block is clicking a lot.
Possible valve block leak? Pressure switch? Sensor fault? ive not had any faults appear on switch.
Any thoughts you clever lot?
Thanks