i can't even imagine you'd need to do anything to fit them
standards only 235/75
thats just a little less than an extra 2'' overall diameter by my calculations so it'll certainly fill the arches a bit morei can't even imagine you'd need to do anything to fit them
standards only 235/75
Really?????
Disco 1 will probably need a camel cut at the minimum.
You may need to go further by cutting the lips off the arches or extending the bump stops.
Really?????
Disco 1 will probably need a camel cut at the minimum.
You may need to go further by cutting the lips off the arches or extending the bump stops.
You do talk **** sometimes don't you ..
I've got 245/75's on mine and don't have any cutting ..they fit perfectly and only just rub on full articulation which means that 235/75 should be just fine especially as thats what I had on mine before fitting the 245's and never had a problem
Your a prick Evil
I have 235 85 16 on my RRC, which is the same chassis and arch lines as the disco, so I KNOW what I had to do to get them to clear.
Can't you can go play with the other kiddies.
235/85 being 2" taller than a 235/75 :doh:
Fcukwit ..those are 81cm tall a 235/75 is only 75cm tall, thats more or less a 2" difference in diameter between the two and you may have the same chassis
But the arches aren't the same
QFT
The common area of complaint is the rear of the rear arches which on a disco come down steeper than a RRC. As for the 235/75's, they are basically 31" which is what I had on mine, needed the rear of the rear arch trimmed and thats it, mine was with a 2" lift on it, never had any other issues.