Hi all.
Found some plugs in my engine bay. Im assuming the ones clipped to the bulkhead are for the fuel burning heater but the ones under the window are a mystery. Have had a look through various wiring diagrams but would like a confirmation. Anyone done anything with them? Retrofitted the parts they are intended for. Did have a little search on here but didnt have allot of luck. TIA
IMAG0023.jpg
IMAG0024.jpg
 
+1 on the heated screen.

In the top picture, I'd say that the sounder for the alarm system might be missing too, so one of those wayward plugs might be for that, probably the one on it's own, not the two on the left of centre.
That device with the round top to the left is the emergency fuel cut-off inertia switch ..... just so you know.
Fitting a new heated screen is the sort of thing you'd need a specialist for, but once you have one fitted, you'll still need a compatible code reader to activate the system in the BCU.
 
The alarm definitely works. Found this out when the battery on my key fob went. Thanks though, ill dig through rave again and see if i can find what is meant to be plugged in there.
 

Similar threads