G

Gezz01

Member

• Feb 15, 2021

• #1

Any advice on re- fitting a centre seat to a 2014 puma tipper. I realise it will not leave any leg room and removal of the plastic central section. Greatly appreciated. Roll on for a better 2021!!!

 

mick 1986

Well-Known Member

• Feb 15, 2021

• #2

Gezz01 said:

Any advice on re- fitting a centre seat to a 2014 puma tipper. I realise it will not leave any leg room and removal of the plastic central section. Greatly appreciated. Roll on for a better 2021!!!

Click to expand...

Refitting? Pumas didn’t come with a 3 front seat configuration. Look at the top of the line CSW, it’s only a 7 seater, 2, 3, 2. I’m not sure the seatbox has the fittings, and I’m quite sure the insurance won’t cover it.

Edit: just had a look and it’s down to vehicles of the Puma era requiring 3 point seatbelts in front/all seats.

 

Last edited: Feb 15, 2021

tottot

Well-Known Member

• Feb 16, 2021

• #3

Another problem if you did do it is that the outer seats were moved inwards some to make more elbow room for driver/passenger with the Puma.
[ Cant say it made much difference myself ]

 

G

Gezz01

Member

• Feb 23, 2021

• #4

Got it fitted with a 2 point linkage. Right squeeze with diff lock gearknob bit awkward. Think I need 3 point inertia belt?? Rear bulkhead has two glass sliding windows. Do’h!!
Cheers

 

Cavey_P38

Well-Known Member

Full Member

• Feb 24, 2021

• #5

I fitted Renault Espace rear seats in mine, they come fitted with integral belts but not sure they will fit width wise will have a measure if your interested