S

Snadger

New Member

• Dec 22, 2007

• #1

On my Series 3 2.25 petrol engine there's a whopping great metal fan that could power a spitfire plane. It causes a phenominal draft and I just wondered whether a plastic bladed viscous fan would be better and allow the temperature to rise a bit?
I could go down the road of an electric fan but I can't be bothered and thought this may be a quick fix?
Or I could use a radiator muff on the outsde I suppose!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 22, 2007

• #2

just take the piggin thing orf - yu wont need it except in summer.

i fitted a peugeot thermo fan fur about £15 and 3 hours work. The write-up is on here if yu look.

 

G-man

BBQ king

• Dec 22, 2007

• #3

don't try to stop the fan with your hand it will hurt.......alot.......you wioll need to visit the hospital.......and you will cry

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 22, 2007

• #4

and find yu hand - or at least several fingers!

 

S

slob

Well-Known Member

• Dec 22, 2007

• #5

G-man said:

don't try to stop the fan with your hand it will hurt.......alot.......you wioll need to visit the hospital.......and you will cry and don't forget you need to drop yer keggs before dumping

Click to expand...

just take it orf

 

S

Snadger

New Member

• Dec 22, 2007

• #6

The Mad Hat Man said:

just take the piggin thing orf - yu wont need it except in summer.

i fitted a peugeot thermo fan fur about £15 and 3 hours work. The write-up is on here if yu look.

Click to expand...

Thanks TMHM, just a bit worried in case I get stuck in traffic and the temp goes beserk!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 22, 2007

• #7

Echo!!!!