C

Corrie

Member

• Apr 10, 2021

• #1

Hi really need a new master cylinder , but I have found a seal kit in my garage stc500090 I see some people are sell it as a master seal and a clutch seal kit. To save me swearing and wasting time ect finding out this does not fit ect, does anyone know if that the correct seal kit? It's a 1989 2.5 td

 

Kev12

Well-Known Member

Full Member

• Apr 10, 2021

• #2

https://www.lrworkshop.com/parts/STC500090
May help.
If it was me then I'd probably replace the master and slave with new so it wouldn't need attention again for a while

 

discool

Well-Known Member

• Apr 10, 2021

• #3

Corrie said:

Hi really need a new master cylinder , but I have found a seal kit in my garage stc500090 I see some people are sell it as a master seal and a clutch seal kit. To save me swearing and wasting time ect finding out this does not fit ect, does anyone know if that the correct seal kit? It's a 1989 2.5 td

Click to expand...

Ok, we have a date and the type of engine, but not the model. So the link below gives the Land Rover models that STC500090 is suitable for.
https://www.devon4x4.com/stc500090-kit-clutch-mas-392158.html

 

C

Corrie

Member

• Apr 10, 2021

• #4

I would replace but I would need to wait for delivery and its the weekend and well I had bought that to do the clutch but never needed it . It lists it so I know in 1 hour after lunch thanks guys

 

R

rob1miles

Well-Known Member

• Apr 13, 2021

• #5

If its an ally master I would not bother changing the seals as the bores wear. Works OK in cast iron as only the seals wear. You may be lucky but its annoying to strip it down and find a step in the bore.