I went with Marslands as they had no wait whereas Richards was a few weeks.

As others have said, it is a TDCI chassis with extra brackets then galvanised. You specify which tank and engine brackets you want when you order, I went with a TDi and TD5 tank which worked quite nicely.

Personally I would go with Marslands again as you get a galv gearbox crossmember, and the A frame brackets. Got no complaints at all about mine.
 
No not at all! Gonna have a think and speak to Richards Chassis as well... I wanted to order before the missus drops and all my cash disappears!
 
Looks like they offer 3mm steel as standard but 4mm and 5mm as an option as well :)

4mm would be nice... 5mm must be getting pretty heavy
 
Im going to speak to Designa-Chassis.. After this thread I had my heart set on a Marsland.. Might just wait :/
 
Just ordered a Richards one for my 200 90, 8-10 weeks wait but I went for that over a marsdens because I didn't want a td5 rear cross member I wanted an original spec one.
Not a bad price at just over £1500 including galv gearbox cross member
 
Yep it's only about sixty miles or so, I've got a transit jumbo so it shoul slot in nicely.
Saves me £140 + vat so happy days
 

Similar threads