stevelup · Jan 15, 2015

Hi folks,

First post - so hello everyone!

Is it possible to access / change the neutral switch on the manual transmission without a ramp or undoing bits of the transmission?

I've had a real good grope around in the area I'm sure it's supposed to be, but I just can't find it.

Cheers,

Steve

wammers · Jan 15, 2015

stevelup said:
Hi folks,

First post - so hello everyone!

Is it possible to access / change the neutral switch on the manual transmission without a ramp or undoing bits of the transmission?

I've had a real good grope around in the area I'm sure it's supposed to be, but I just can't find it.

Cheers,

Steve

Left side of transmission forward of gear lever position. You should find reverse switch and neutral switch close together.

stevelup · Jan 15, 2015

Thanks - I'll have another rummage!

Datatek · Jan 15, 2015

stevelup said:
Thanks - I'll have another rummage!

Download RAVE the workshop manual from Wammers link in his EAS guide in the "How To" section, it will give you full details.

brianp38dse · Jan 15, 2015

They are hard to reach not very easy to remove i tryed on mine when i trying to sort low range not working managed to got the plug off but not a lot of room for spaners or sockets, whats wrong with with it

stevelup · Jan 16, 2015

Exactly the same issue - it is preventing low range from being selected. It appears to be completely open circuit. I've linked out the neutral switch pin on the transfer box ECU for now.

I'm planning on having another go at it tomorrow. I knew where it -should- be, but I just couldn't find it by groping around blind. As long as I know that it is theoretically accessible, I'll risk ripping some more flesh off!

I had a suspicion that it wouldn't be easy. I'm hoping I can get a ratchet spanner onto it... First thing I'll do is link it out though in case it's a wiring fault.

tomcat59alan · Jan 16, 2015

reverse light switch is ok to do but the neutral is a bastard.

wammers · Jan 16, 2015

tomcat59alan said:
reverse light switch is ok to do but the neutral is a bastard.

Good evening Alan trust all is well with you.

tomcat59alan · Jan 16, 2015

wammers said:
Good evening Alan trust all is well with you.

Hello Tony, yes as well as can be expected. Spent all day moving light switches ready to knock some walls down, the Enemy wants double doors in the main lounge and kitchen. She also wants all the doors changed so 17 new ones were delivered yesterday. Expects them to be fitted yesterday. Just going through a page and a half of new posts I missed today, wish I was still working

How are you and yours?

wammers · Jan 16, 2015

tomcat59alan said:
Hello Tony, yes as well as can be expected. Spent all day moving light switches ready to knock some walls down, the Enemy wants double doors in the main lounge and kitchen. She also wants all the doors changed so 17 new ones were delivered yesterday. Expects them to be fitted yesterday. Just going through a page and a half of new posts I missed today, wish I was still working How are you and yours?

Fine all is good. Just take the doors off and put curtains up.

tomcat59alan · Jan 16, 2015

wammers said:
Fine all is good. Just take the doors off and put curtains up.

I wouldn't get away with that suggestion. Save a lot of money and I could get another P38. Not going back till next month so she thought I needed something to do

stevelup

Member

wammers

No longer with us, RIP

stevelup

Member

Datatek

Well-Known Member

brianp38dse

Well-Known Member

stevelup

Member

tomcat59alan

Well-Known Member

wammers

No longer with us, RIP

tomcat59alan

Well-Known Member

wammers

No longer with us, RIP

tomcat59alan

Well-Known Member

Similar threads