S

scott301004

New Member

• Nov 1, 2009

• #1

Hi All,

I replaced the clutch and DMF in my DSE this week, All seems to be well although the car is now being a bitch and seems very tight when going between gears whilst on the move.

It almost feels like the clutch is still in contact by a nats knacker.

Clutch and flywheel are luk(DMF) & Valeo clutch.

Any Ideas?

 

arron beast unleashed

New Member

• Nov 1, 2009

• #2

is it bled up properly? how high does the clutch bite on the peddal? if it near the floor that would suggest air in the system and would give you your nats knacker issue.

 

S

scott301004

New Member

• Nov 2, 2009

• #3

would the wrong oil in the box cause this?

 

arron beast unleashed

New Member

• Nov 3, 2009

• #4

i suppose it could but you would have to put ep oil in to cause enough drag, mtf 94 is the proper oil to use.

 

S

scott301004

New Member

• Nov 3, 2009

• #5

arron beast unleashed said:

i suppose it could but you would have to put ep oil in to cause enough drag, mtf 94 is the proper oil to use.

Click to expand...

well I had put geartex 85/90 into it and now got dexron2 and seems better according to the wife