stevelup

Member
Hi

Is it possible / practical to change this without a ramp and dropping the transmission.

It seems to be impossible, but I might not be trying hard enough!

If anyone has successfully done this, I'd like to hear about it...

Cheers!
 
I tried on mine and could not manage it, I don't know if you can if you drop the gearbox x member
what is the problem, if its cant select low range I pulled the plug of the switch and bridged it with wire and that worked, I did change the switch when I dropped the box but it still didn't work, there is a plastic collar on the shaft that works the switch and that is a known problem.
 
Hi

Is it possible / practical to change this without a ramp and dropping the transmission.

It seems to be impossible, but I might not be trying hard enough!

If anyone has successfully done this, I'd like to hear about it...

Cheers!
Reverse light switch yes but not the neutral. Try as per Brian's post
 
I've already bridged the wires on the transfer box controller. I was contemplating fixing it properly but it's looking like it isn't worth the trouble...
 
the stupid thing is I got a new switch and it came with the plastic bit but I didn't change that so it still didn't work, will do it next time box is out as there will probably be a next time.
 
the stupid thing is I got a new switch and it came with the plastic bit but I didn't change that so it still didn't work, will do it next time box is out as there will probably be a next time.
I do hope not!
 

Similar threads