S samcoombes Active Member Jun 6, 2014 #1 Sorry.... I'm in the middle of doing my manifold gasket (obviously needed - see photos!) On the new one do the aluminium looking bits face the head or the manifolds? Thanks
Sorry.... I'm in the middle of doing my manifold gasket (obviously needed - see photos!) On the new one do the aluminium looking bits face the head or the manifolds? Thanks
Kwakerman Well-Known Member Jun 6, 2014 #2 Manifold, as the head has one flat surface and the manifold has three
S samcoombes Active Member Jun 6, 2014 #4 And finally, all back together, valves adjusted, running beautiful. These two were tucked down behind the head - breather?
And finally, all back together, valves adjusted, running beautiful. These two were tucked down behind the head - breather?
mmajor2 Member Jun 6, 2014 #7 Mine do, but then again, its a bit of a mess under my bonnet, im sure there is a proper place for them somewhere...
Mine do, but then again, its a bit of a mess under my bonnet, im sure there is a proper place for them somewhere...
mrchurchill109 Active Member Jun 6, 2014 #8 Yep. Open to atmosphere - reason they have that U-bend in the ends to keep crud out.