disco dickie

disco dickie

Active Member
i had a gear selector switch fitted, some of you call this a xy switch i think, but ithink i may need a new piece of electric cable that this plugs into as it was not in great condition when the new bit was fitted. does any body know how long, how far it goes and how easy it is to fit or even if it is available. or would the easiest thing to do be splicing in a new plug?
 
Is it still showing a fault then ?

If not and you want to add some protection to the loom, just buy some split convulated tube and put that over it.
 
i thought it had cured it but it still does it but less often. it seeemed to only do it when the roads were wet. a land rover that dont like the wet is not a good thing me thinks. on saying that it done it today in the dry.
 
Make sure your battery is in good condition, cold weather + failing battery = FIRST issue to throw the m & s lights
 
cheers panza, im pretty sure the batterey is sweet as a nut. when i had the switch changed the mechanic said the bit it plugged into was in bad condition and he put a cablble tie on it to pull it together. it did it less often after this. it also went on the diagnostic thing and said it was the switch before i had it fitted. so i am convinced rightly or wrongly that this is the guilty bit. wouldnt life be boring if everything was simple
 
You must log in or register to reply here.

Similar threads

archwayanimal
M and S issue
Replies
13
Views
775
sierrafery
sierrafery
Heathereviemay
M and S flashing
Replies
3
Views
874
MJI
MJI
B
Disco 2 Xyz switch? Cranks but won’t start.
Replies
9
Views
1K
Bilbobagend
B
J
Disco 2 M&S flashing
Replies
10
Views
1K
Jimmyd2
J
A
Land Rover Discovery 2 2001 TD5 M+S Error (Now not starting)
Replies
8
Views
2K
Andrei Boboc
A