I am trying to research part numbers for the forward and rear output shaft seal felt washers and lock nuts for my LT95 gearbox. I've not had any luck and was hoping that someone on here could provide me with the part numbers I am looking for:

Forward Output Seal Felt Washer
Forward Output Seal Lock Nut
Rear Output Seal Felt Washer
Rear Output Seal Lock Nut

Thanks!

nuts are ny120041l and ny116041l ,felt washer is 594029 only fitted on rear , though usually no reason why you cant reuse nuts and use silicone between steel washer and flange

jamesmartin said:

nuts are ny120041l and ny116041l ,felt washer is 594029 only fitted on rear , though usually no reason why you cant reuse nuts and use silicone between steel washer and flange

Click to expand...

Thank you for those part numbers. Not sure why I couldn't find them.

I agree that normally you can reuse the lock nuts. In this case though, I replaced both output seals over the weekend and the rear started leaking last night. When I took it apart, the lock nut was spinning freely. It was properly torqued to 179 Nm as required so the only thing I can think is that the lock nut needs replacing. There isn't much of the nylon left to be honest.