can you check which, hold 1 output flange and try turning the other one back n forth and see how much play is in the center (with diff lock engaged)
then same again without difflock and see if there is any more.

5-10mm when difflock is disengaged, the same when engaged but you can turn the output shafts about 1/8 of a turn in different directions before they stop but the gearbox input turns during this, so mabie worn locking mechanism ? I'm not sure if this is normal
 
Hi mate, do you have any defender body parts.. I live between Ashbourne and derby to.. Rebuilding my 90..
Cheers browny..
 
Right I need to sell some stuff out of the garage to open it up to help pay for Aussie :D

Firstly the LT77 gearbox and transfer box out of my 90, perfect working condition, 1.4 transfer box SOLD

1.2 ratio transfer box out of disco, worked fine when removed £50

300 auto box changed smooth drove well SOLD

4X freestyle disco alloys with good tyres 4mm plus, £140

4L v8 engine (block, heads, injectors, starter) no loom £250

300disco body still complete rusted floor the rest is pretty good, offers on bits

Got a 300 and 200 turbo I'd probably rebuild them before use again but they would be fine, offers

Couple of sets of 200tdi rocker arms and shafts

Set of new (started the 90 a couple of times ) injectors £45 each

Set of second hand injectors £25 each

Various other bits just ask, if I'm miles out on price make me an offer :)

Collection preferred but can courier at cost :)

Disco body and chassis is still avalable, it'll get scrapped at the end of the month if knowone wants it, still has all the doors which are good and the chassis is good, I can get 100 scrap for the lot at least if someone wants to offer me that or just stuff out of it ?
 
Bump
the body will get scrapped this week. Someone can have the whole set of doors in good condition for £60 still got headlights, indicators, rear pillar lights and interior
 

Similar threads