Langers · Jan 17, 2014

Hello chaps - bit of an unusual one!

I need a cover plate for the back of the LT230R in my Td5 110.

I've taken off the PTO unit that was fitted for my winch (for sale here)

So I need the PTO cover for the back of it. I have got hold of one of these;

Cover - Genuine Land Rover at www.rimmerbros.co.uk (FTC3178)

But it doesn't fit properly.. only 3 of the 6 bolts line up.

So does anyone have, or know of where, I can get the get the correct PTO cover plate for my LT230R? Or even just find the correct part number for it?

Thanks all

:car:

tetsu0san · Jan 17, 2014

Are you sure it doesn't fit? I am sure you are right but they only fit one way round...

Langers · Jan 17, 2014

tetsu0san said:
Are you sure it doesn't fit? I am sure you are right but they only fit one way round...

Pretty sure I tried it in every different orientation, it seems the hole centers are at a slightly different position than what is required.

tetsu0san · Jan 17, 2014

Maybe the plate you bought is of questionable quality then.

Have you got any breakers near you? Might be able to get a second hand one at a good price.

flat · Jan 17, 2014

it should fit, the holes are not concentric so just try it every seperate hole, keep rotating it round till it all lines up, keep trying, it stumped me for a while to lol

jamesmartin · Jan 17, 2014

you may even have plate the wrong way round ,they do all fit

Langers · Jan 18, 2014

Ok cheers guys - I've got another tube of sealant and will give it another go next week

Langers · Jan 24, 2014

You guys were correct - I had the plate oriented the wrong way.
Seems the holes are positioned in such a way that it will only bolt on ONE way!
... Does make you wonder what the engineers at Leyland were thinking when they decided that would be a good idea

flat · Jan 24, 2014

Langers said:
You guys were correct - I had the plate oriented the wrong way.
Seems the holes are positioned in such a way that it will only bolt on ONE way!
... Does make you wonder what the engineers at Leyland were thinking when they decided that would be a good idea

they didnt think, thats the problem

jamesmartin · Jan 24, 2014

Langers said:
You guys were correct - I had the plate oriented the wrong way.
Seems the holes are positioned in such a way that it will only bolt on ONE way!
... Does make you wonder what the engineers at Leyland were thinking when they decided that would be a good idea

so bearing plate in front of the cover plate is fitted in correct orientation is line bored for bearing fitted to case apart from the oil drain

jasonslaphead · Jan 24, 2014

Langers said:
Hello chaps - bit of an unusual one!

I need a cover plate for the back of the LT230R in my Td5 110.

I've taken off the PTO unit that was fitted for my winch (for sale here)

So I need the PTO cover for the back of it. I have got hold of one of these;

Cover - Genuine Land Rover at www.rimmerbros.co.uk (FTC3178)

But it doesn't fit properly.. only 3 of the 6 bolts line up.

So does anyone have, or know of where, I can get the get the correct PTO cover plate for my LT230R? Or even just find the correct part number for it?

Thanks all :car:

The winch went for a few quid, I might fling mine on there.

Langers · Jan 27, 2014

jasonslaphead said:
The winch went for a few quid, I might fling mine on there.

That's about the going rate for a full kit - they are still quite sought after by all sorts... popular with tree surgeons I'm told!

Langers

Well-Known Member

tetsu0san

Active Member

Langers

Well-Known Member

tetsu0san

Active Member

flat

Well-Known Member

jamesmartin

Well-Known Member

Langers

Well-Known Member

Langers

Well-Known Member

flat

Well-Known Member

jamesmartin

Well-Known Member

jasonslaphead

Active Member

Langers

Well-Known Member

Similar threads