Got Td5 sorted, still got issues with the 90 rear drum brake. Never ends.
The story goes like this...
Nearside rear brake drum catches the shoes when rotating by hand. Tight-slack-tight-slack etc. It’s very evident under braking, I can feel a pulse through the pedal and when braking heavily the whole landy vibrates. The problem only started after replacing the original drums and shoes. Replaced with mintex shoes and bearmach drums. I have had them off and on numerous times checking they’re fitted correctly (spring positions etc) I know they’re right. Offside no problems. So, it looked like the hub was oscillating when holding a fixed object to the outside of the hub, so, I replaced the following with new genuine parts and tested each time. Hub, bearings, stub axle, half shaft, brake cylinder (original was leaking) another set of shoes (trw) and drums (britpart) and snail adjuster. No change at all. The only thing I haven not replaced is the backplate. That’s it.
Any ideas??
Cheers
Ben
The story goes like this...
Nearside rear brake drum catches the shoes when rotating by hand. Tight-slack-tight-slack etc. It’s very evident under braking, I can feel a pulse through the pedal and when braking heavily the whole landy vibrates. The problem only started after replacing the original drums and shoes. Replaced with mintex shoes and bearmach drums. I have had them off and on numerous times checking they’re fitted correctly (spring positions etc) I know they’re right. Offside no problems. So, it looked like the hub was oscillating when holding a fixed object to the outside of the hub, so, I replaced the following with new genuine parts and tested each time. Hub, bearings, stub axle, half shaft, brake cylinder (original was leaking) another set of shoes (trw) and drums (britpart) and snail adjuster. No change at all. The only thing I haven not replaced is the backplate. That’s it.
Any ideas??
Cheers
Ben