Hi guys, I’m new to Landy ownership and have just start work on a project 90. I have removed rear interior trim to discover corrosion in LH rear tub corner where it connects to side panel. Long story short cappings on tub look ok but I can’t find the name or replacement part for the corner bracket (pics attached). Could anyone help identify the part name so I can order a new one?
Flossie
Well-Known Member
Aren't they rivited on?
If so, drill them out, sides will need removing though, and clean them up or make new as said.
I seem to recall the steel is quite thick there so maybe they will clean up good?
Can't look at mine as I have station wagon trim covering it all up.
Or someone may have some scrap sides that they can salvage the bits for you? I know I scrapped a few sides years ago because no one wanted to buy them.
Try an ad in the wanted section?
Edit- just expanded your pic on my phone and can see they are rotted.
If so, drill them out, sides will need removing though, and clean them up or make new as said.
I seem to recall the steel is quite thick there so maybe they will clean up good?
Can't look at mine as I have station wagon trim covering it all up.
Or someone may have some scrap sides that they can salvage the bits for you? I know I scrapped a few sides years ago because no one wanted to buy them.
Try an ad in the wanted section?
Edit- just expanded your pic on my phone and can see they are rotted.
bluedog333
Well-Known Member
Looks mostly in solid fettle. Cut and weld a repair piece in and she’ll be good ( or take to fabricators if you don’t have a welder. Buy a welder. ).
NiallRussell
Well-Known Member
FYI depending on what you want, sides for a 90 are not expensive. many second hand pop up. you might just find replacing the whole sides is easier if there is any other work needed on them.
