I know, Has anyone noticed photo 6 Rear cross member is shot but spare one is laid on top.
Just noticed myself before.
Yes, I'd seen that. The rest of the chassis looks in good nick for it's age. Franklin Steel, in Blaydon, I've found good for galvanising.
 
i aint looked at pics if you know what you are doing you can weld one back in and you wouldnt notice but i would and strengthening plates too it too over the joints to make it super srong so you dont pull the arse our of ya landy when towing or in my case i use them as a mobile jig pmsl if i dont use a tree
Got a couple of mates that could weld it on for me.
Ill give you a shout when I get it Mate you can come and have a look if you want, unless its a load of rusty crap then ill be to embarrassed to show anyone, LOL
 
i didnt even know they did it ive got a chassis that needs doing and ive got a full defender needs stripping none stop party here cheers
for info about them ive just bought some tube from metal supermarket and i dont think they are very cheap will give them a shout do they also supply steel stock
 
Yes, I'd seen that. The rest of the chassis looks in good nick for it's age. Franklin Steel, in Blaydon, I've found good for galvanising.
Just noticed myself before, hope he throws all bits in and does not forget any.
Are you Local to Mate
 
you need as much as you possibly can is all the dash stuff there etc as some dash stuff is dead expensive
 
i didnt even know they did it ive got a chassis that needs doing and ive got a full defender needs stripping none stop party here cheers
for info about them ive just bought some tube from metal supermarket and i dont think they are very cheap will give them a shout do they also supply steel stock
Yes, they supply steel, but I've never bought any from them, so no idea of their prices. Worth a try though.
They don't galv at that factory. Every Tuesday they send a wagon up to a place in Scotland and it comes back on a Thursday. Prices were reasonable though.
 
how much they charge do they blast them too ? i used leeds galvanising they were ok good service only prob when it came back it was on a 17.5 tonne waggon on top of a load of other gear so was a complete nightmare to get off no hiab
 
how much they charge do they blast them too ? i used leeds galvanising they were ok good service only prob when it came back it was on a 17.5 tonne waggon on top of a load of other gear so was a complete nightmare to get off no hiab
No, they don't blast. There was a £25 minimum charge, but not sure of their rate per Kg. I just took a load of bits and the guy just quoted me a price, which was very acceptable at the time. Sorry, you'll have to give them a bell.
 
What north east are you in.
Looks like a nice project, gumtree has a lot of land rover parts at the moment.
If you scan the little box below where the little bit of paper is on the v5 you can get the full reg number.
That is in the last picture, I bet the owner never knew you could do that, need a bigger bit of paper next time.:D
Last mot expired mid 2011.
White 87 110, 140k miles.
It may be a proper county station wagon and they have a big price tag when finished.
Chassis looks good but not sure the tape is strong enough to hold the rear crossmember.:)
Looks like you have got good value for your money, hopefully paintwork will be good enough to leave it factory original.
Well done on your purchase.
 
Last edited:
What north east are you in.
Looks like a nice project, gumtree has a lot of land rover parts at the moment.
If you scan the little box below where the little bit of paper is on the v5 you can get the full reg number.
That is in the last picture, I bet the owner never knew you could do that, need a bigger bit of paper next time.:D
Last mot expired mid 2011.
White 87 110, 140k miles.
It may be a proper county station wagon and they have a big price tag when finished.
Chassis looks good but not sure the tape is strong enough to hold the rear crossmember.:)
Looks like you have got good value for your money, hopefully paintwork will be good enough to leave it factory original.
Well done on your purchase.
Thanks Mate, Still think I might be out of my depth on this one but just have to take my time.
Wont really know what like like till it gets here got my fingers crossed.
 
Thanks Mate, Still think I might be out of my depth on this one but just have to take my time.
Wont really know what like like till it gets here got my fingers crossed.
Nah, you’ll be fine. It looks like a great project.
But I will expect it to look like this by the end of next month...
0C44EDF5-AFED-4AAE-9908-63D8DA2E10F9.jpeg
 
another thing i forgot to mention security when you building it make sure you have all your gear out of sight or locked away or the thiefs will have it away especially scrap men,caught one walking in my back yard i said what the f you doing he said getting scrap i said are u taking the p now f off ,ive got cameras all over the shop and i work from my house,ive also got external pir detectors and lots of led flood lights.and ptz motion activated cameras bit of an over kill but already caught one lets just say he wont be back in a hurry lol .
 

Similar threads