Tony Reeves

Tony Reeves

Well-Known Member
Saw this one... http://www.trademe.co.nz/Browse/Listing.aspx?id=1282779065

The seller is the same one I bought my last Freelander from and it finished up a very good deal. Not worried about minor issues like BHG's.

More worried about keeping our current place tidy and the (hopefully) soon move to a bigger property with a workshop.

Even more worried about the reaction from my wife, and maybe @GrumpyGel 's wife if she sees yet another hulk on their back lawn.
 
Bring 'em on Tony, more the merrier :)

But its not coming anywhere near my pad with those wheels on it :) Unless there's some home baking bribery!

Have you seen this one....

http://www.trademe.co.nz/Browse/Listing.aspx?id=1283628909

Its a 3 door with the girly body kit (would they allow you into Greta Valley with that kit?), but you could sell that to @rob_bell as backup. Its a TD4 manual and looks to be a higher spec than that V6. Starting at under $1K but not sure what the reserve is.
 
GrumpyGel said:
Bring 'em on Tony, more the merrier :)

But its not coming anywhere near my pad with those wheels on it :) Unless there's some home baking bribery!

Have you seen this one....

http://www.trademe.co.nz/Browse/Listing.aspx?id=1283628909

Its a 3 door with the girly body kit (would they allow you into Greta Valley with that kit?), but you could sell that to @rob_bell as backup. Its a TD4 manual and looks to be a higher spec than that V6. Starting at under $1K but not sure what the reserve is.
Click to expand...

Yes, I saw the TD4, right about the wheels.
 
GrumpyGel said:
Drop everything Tony....

http://www.trademe.co.nz/motors/used-cars/land-rover/auction-1284962043.htm
http://www.trademe.co.nz/motors/used-cars/land-rover/auction-1284962043.htm
2002 TD4 ES Manual and 3 Door but nice motor and cracking price $980. Ex-UK, came over here late 2006 according to Carjam, so running a risk on the rust.

I so want to buy that car - but not at the moment.

No, you can't have my IRD - and if it goes missing from the garage I'll know who took it :)
Click to expand...

I had not seen that one. Ideally my next will be a facelift high spec TD4 FL1. The 2004 V6 could be made TD4 without too much stress.

Buuuuuut.......

By end of today we may own 2 houses, one more than we should. I NEED to get that situation sorted before spending any more money.

Mind you, the Greta Valley property could stand about about a dozen landys on it, and if so Teresa would be keeping our Sylcan street property as part of the settlement.:mad::mad::mad::mad:
 
GrumpyGel said:
Bring 'em on Tony, more the merrier :)

But its not coming anywhere near my pad with those wheels on it :) Unless there's some home baking bribery!

Have you seen this one....

http://www.trademe.co.nz/Browse/Listing.aspx?id=1283628909

Its a 3 door with the girly body kit (would they allow you into Greta Valley with that kit?), but you could sell that to @rob_bell as backup. Its a TD4 manual and looks to be a higher spec than that V6. Starting at under $1K but not sure what the reserve is.
Click to expand...
Crumbs - almost identical to mine!

The bodykit isn't something I'd have wasted money on (it cost a PO £1,400 to get fitted! :eek:) but it's kinda growing on me.

Might look better with an A-frame, as that particular car has got?

At least it saves the body sides from the rigours of yummy mummy parking manoeuvres...;)
 
rob_bell said:
Crumbs - almost identical to mine!

The bodykit isn't something I'd have wasted money on (it cost a PO £1,400 to get fitted! :eek:) but it's kinda growing on me.

Might look better with an A-frame, as that particular car has got?

At least it saves the body sides from the rigours of yummy mummy parking manoeuvres...;)
Click to expand...

I have only seen 3 doors in NZ with that body kit. Maybe all sent here and to Japan had them??????

Can it just be removed and you are left with a standard body side?
 
Tony Reeves said:
I have only seen 3 doors in NZ with that body kit. Maybe all sent here and to Japan had them??????

Can it just be removed and you are left with a standard body side?
Click to expand...
Yes, it can :) I haven't tried to do this, but it appears to be only glued on, plus may be a couple of screws in the lower wheel arches (many of these are missing on my Hippo).

Getting rid of the old glue residue might be the main challenge?
 
You must log in or register to reply here.

Similar threads

htr
Freelander 1 My Winter Project
2
Replies
35
Views
4K
rob_bell
rob_bell
M
I've put a deposit down and now concerned
2 3 4
Replies
77
Views
6K
Joe_H
Joe_H
sail
For all users Freelander 2.0 SDI (70-72kW) with diesel motor 20T2N build between 1997 – 2003
Replies
3
Views
2K
sail
sail
H
Newb looking for a TD4 Freelander
Replies
1
Views
621
v8geoff
v8geoff
Earl
My Defender 300Tdi
Replies
5
Views
2K
Earl
Earl