hi all,, sorry to bother you with a problem you have already covered many times but im at my witts end, i have a p38 1997 dse all was fine until i parked up at home on friday, went to start it saturday but the remote woulnt open doors , its never opened drivers door since i got it. used the key to get in but it wont start keeps saying press keyfob or enter code, well this is the problem, when i was going throu the paper work for it i found a reciept from auto service, and this is what it said,,

attempted to prog immob as requested, no comms to becm. as discussed becm requires replacing. customer supplied s/h becm, swap main board attempt to prog, found fault is with security board, request customer gets keyto go with becm,
prog supplied s/h key to match becm,

then it says a bottom.

if customer requires any further keys then will require chassis number from vehicle becm came from,

there is now way i can get that info , is there anything i can do to get this car going again, im totaly stuck,, i also found what looks like the eka code but i tried it and still no good, there was also a 5 didget number on the same paper as the eka, would that be anything,
sorry its so long winded but i want to be sure you know what im trying to say,
any help would be greatfully recived,
ps im in wolverhampton in the midlands, cheers mick,,,,,,,,,,,,,
 
I had same problem with my L322 and couldnt get in.
Ended up going underneath the car and connecting a battery charger to the alternator and after ten minutes the key fob worked to open the car and I could get in!!!
 

Similar threads