I have got everything working except the reversing light - I have looked through all of the information I can find and can't locate the gearbox switch for the reversing light?
Anyone got any idea please? It's a 1992 Classic auto with a 3.9 V8
Thanks!
The reverse light/inhibitor switch located on the gearbox...
You can reach it from underneath and do it by 'feel', be careful not to knock too much dirt in to the g/box...
Reverse light switch is an integral part of start inhibitor
switch. It is located on left hand side of gearbox,
accessible from beneath vehicle.
1.
Place vehicle on suitable ramp.
2.
Disconnect battery negative lead.
3.
Disconnect multi-plug.
4.
Release clamp bolt, remove clamp.
5.
Remove switch.
Refit
6.
Fit a new O ring to switch.
7. Reverse removal procedure
http://www.landroverresource.com/docs/rangerover/Range_Rover_Classic_Manual_1995.pdf
page 733, J5970
CarlTurner972
Member
Can an additional reverse light be added to this switch?
Or need to be added to the light wiring?
Or need to be added to the light wiring?
CarlTurner972
Member
You do surprise me.
FlyingPete
Well-Known Member
Not so- it's just not a testable item, so whether it works or exists is irrelevant to the MOT test. Same as things like front fog lights, extra high beams etc.
flat
Well-Known Member
Useful to know, I stand corrected, cheers
