W

woodenshjips

New Member

• Jun 10, 2013

• #1

Hi,
Clutch fluids leaked out of our landrover series 3 1982 swb,can anyone let me know where the bleed valve is (is it on the slave cylinder i cant seem to locate it)
Thanks

 

jamesmartin

Well-Known Member

• Jun 10, 2013

• #2

just above the pipe from master cylinder , though some are on a short pipe themselves to make access easier,7/16 spanner needed

 

W

woodenshjips

New Member

• Jun 10, 2013

• #3

Thanks just need to find where its leaking from, any common places to look for?

 

jamesmartin

Well-Known Member

• Jun 10, 2013

• #4

look at clutch pedal and youd need to remove slave to see if its leaking unless its dripping out of housing

 

W

woodenshjips

New Member

• Jun 10, 2013

• #5

and where is the master cylinder located?
Thanks

 

jamesmartin

Well-Known Member

• Jun 10, 2013

• #6

under bonnet behind pedal box ,if it leaks it usually runs down back of pedal

 

W

woodenshjips

New Member

• Jun 10, 2013

• #7

Sound will go have a look

 

D

divie

Well-Known Member

• Jun 10, 2013

• #8

Also follow the route from master cylinder and look at the flexi pipe that runs down the back of engine/bulkhead. I would put new seals in both cylinders and fit a new flexi pipe. Under a tenner and you have got to bleed it anyway.