Longstride

Active Member

• Oct 14, 2018

• #1

Hi all,

Remember that lightweight I painted Kermit green by accident?

Well she looks better now in bronze green but I've noticed recently that when I coast in gear (i.e ease off the gas) I hear a quiet yet tinny rattling from below driver's seat area.

What could this be and should I be concerned!? Otherwise driving totally fine!

Tips on where to look welcome!

 

Attachments

• 
  IMG_20181012_174623.jpg

  789.5 KB · Views: 179

wireman

Well-Known Member

• Oct 14, 2018

• #2

You could look at the handbrake linkage. somethings loose rattling against the fuel tank, loose fuel level sender, loose fuel tank mounting bolt. Difficult to find if it only does it when you're moving. Nice Lightweight by the way.

 

Longstride

Active Member

• Oct 14, 2018

• #3

wireman said:

You could look at the handbrake linkage. somethings loose rattling against the fuel tank, loose fuel level sender, loose fuel tank mounting bolt. Difficult to find if it only does it when you're moving. Nice Lightweight by the way.

Click to expand...

Cheers Wireman. If I take it out of gear while rolling the noise stops, so I'm thinking gear box?

 

T

Thommo1

Well-Known Member

• Oct 14, 2018

• #4

Probably worth a crawl underneath when it's not peeing down for obvious loose bolts or such. That and help from someone such as @jamesmartin or @dieseldog69 might be able to offer more technical help.

 

H

Hicap phill

Well-Known Member

• Oct 14, 2018

• #5

Check UJs are tight
Fuel sender can tap in a tank

 

T

Thommo1

Well-Known Member

• Oct 14, 2018

• #6

Well I ain't no mechanic, but I have next week off work if ya want a hand trying to sort the issue..........

 

steve2286w

Well-Known Member

• Oct 14, 2018

• #7

When I rebuilt my gearbox and ran it in gear without the prop attached I had a tinny rattle and was worried, Thea answer I git back was with the prop on and a bit of load on gbox all will be fine , and it was.

 

C

Colthebrummie

Well-Known Member

• Oct 16, 2018

• #8

I wish I could hear a tinny rattle, all I get is a cochopheny of clangs, bangs and loud rattles.

Col

 

Bobsticle

De Villes Advocaat

• Oct 16, 2018

• #9

I’m also concerned if it’s s series at all.
Mine sounds like a tinkers scrap box when stationary, never mind when moving.

 

tottot

Well-Known Member

• Oct 16, 2018

• #10

It is a waste of time/life trying to track down every little rattle and squeek on an old landy.

 

Longstride

Active Member

• Oct 18, 2018

• #11

Thanks all! Your casual nonchalance towards such sounds has filed me with confidence! The obvious answer is not to take my foot of the gas!

And @Thommo1 I'm away next week but if you're near me So30 then always welcome some landy chat advice and a cup of tea!

 

Longstride

Active Member

• Oct 18, 2018

• #12

Also I acquired a second lightweight off fleabay very cheap and it drives better than my nice one!!!

 

R

rob1miles

Well-Known Member

• Oct 18, 2018

• #13

We wear ear defenders, especially on the motorway, protects our hearing and my sanity / anxiety. I'm confident the serious noises will get through...
Recently my "its a disaster I'll need a rebuild" noises have been - the bonnet rattling, a strap on the roof rack, a screw on the tunnel just touching the OD linkeage, my metal cup in the metal cupholder on the dash (I have a bike water bottle carrier screwed to the dash as a cup holder) and yesterday on a run back from Portsmouth , my son playing a game on his tablet with the volume on full (because he had ear deferders on). The overdirve whines but only off load, accelerating or decellerating keep it quiet, simple to fix - we only accelerate or decelerate, never coast in OD, job done!

 

Blackburn

Well-Known Member

• Oct 20, 2018

• #14

Going on and off load intermediate gear in transfer case can thrust forward and back maybe needs shimming.

 

Sputnik01

Active Member

• Oct 21, 2018

• #15

I had a bit of a rattle like that. It turned out the front prop shaft was knackered where the two halves slid in & out of each other.

 

Sputnik01

Active Member

• Oct 21, 2018

• #15

I had a bit of a rattle like that. It turned out the front prop shaft was knackered where the two halves slid in & out of each other.

 

Sputnik01

Active Member

• Oct 21, 2018

• #16

I had a bit of a rattle like that. It turned out the front prop shaft was knackered where the two halves slid in & out of each other.