Zorro123

New Member

• Dec 20, 2010

• #1

New landy owner could use some help plz

Im having a light problem with my 1993 2.5td 90 drivers side stop & tail light, fog light plus drivers side side light dont work, have checked and replaced the bulbs but no difference...Anybody got any ideas why the lights on just one side of the car would'nt be working????

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Dec 20, 2010

• #2

check these places
1)right hand front chassis leg as loom enters
2)right rear chassis where loom exits
3)lift rubber flap in wheel arch behind lights -check body seam not sawn through loom as mine did.

 

Last edited: Dec 20, 2010

Zorro123

New Member

• Dec 20, 2010

• #3

Thanks for the advice will have a look

 

L

Lumberjack Pad

New Member

• Dec 20, 2010

• #4

Also check relay behind dash instruments (speedo, fuel guage etc). Similar thing happened to me and it was that relay.

 

Zorro123

New Member

• Dec 20, 2010

• #5

Will have a look at the relay but would that only affect the one side?

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Dec 20, 2010

• #6

Zorro123 said:

Will have a look at the relay but would that only affect the one side?

Click to expand...

yes and rear body seam behind lights prime for eating through loom

 

sible88

New Member

• Dec 20, 2010

• #7

Sounds silly wiggle the fuses the left and right are separate

 

L

Lumberjack Pad

New Member

• Dec 20, 2010

• #8

Zorro123 said:

Will have a look at the relay but would that only affect the one side?

Click to expand...

sorry

just re-read, didn't realise it was just one side :doh:

 

Zorro123

New Member

• Dec 21, 2010

• #9

Thanks for all the help, turned out that the last owner when he renewed the side and tail lights did'nt bother to use proper connectors instead just twisted the wires together :crazy: so one of them was causeing a short so problem solved