T

tommyt01

Member

• Feb 7, 2015

• #1

I've tried searching but can't find the answers im Looking for

Got my self a light bar, got the inline fuse, the cable and the relay, i know the basics of how to wire it up.

I've got a 3 way switch, so can either be on or off or on with the main beam.

I just don't know where I should pick the feed up for the main beam, and a live that switched so will only work when the ignitions on?

Any help would be much appriceted

Thanks

 

s0ftmick

Active Member

• Feb 7, 2015

• #2

I wired mine into the live for the main beam, its only a relay feed so doesn't take much current.

Just follow the wire back from the headlight and splice in!

 

auf_wiedersehen_pet

Well-Known Member

• Feb 7, 2015

• #3

tommyt01 said:

I just don't know where I should pick the feed up for the main beam

Click to expand...

Do you mean 12v feed for the relay or 12v feed to power the lights?

 

T

tommyt01

Member

• Feb 7, 2015

• #4

the feed to the swith for on? Somewhere in the cab would be good, can I splice into a wire under the steering coulum for the main beam? Which one is it?

 

terr

Active Member

• Feb 7, 2015

• #5

im all so in the prose's of putting in a 3 way switch
main beam on
off
on with ign
ll taken from the drivers fuse box yousin ad-a-circuit (like a fuse piggy back)
j