So you are replacing a old chassis with a new one? What are you towing the trailer with? and do you own a tape measure?
alexr
Active Member
Can't you just measure your old chassis?
Jonnyb1990
Well-Known Member
isnt a 90 90 inches ?
90 in = 228.6 cm
90 in = 228.6 cm
NO............. That is center of axel to axel measurement. Then you have a bit of chasis for the front and a bit for the back so a few feet longer than 90"
Dan_Trials
Well-Known Member
NO............. That is center of axel to axel measurement. Then you have a bit of chasis for the front and a bit for the back so a few feet longer than 90"
Plus a 90 doesn't have a 90" wheel base
alexr
Active Member
Plus a 90 doesn't have a 90" wheel base
What does it have then?
bushwwacker
Well-Known Member
Wheel base is 92.9"...
Don't know O/All length tho
(not as I'm sure how you can make a decimal from an imperial measurement...)
Last edited:
Dan_Trials
Well-Known Member
You know what, I've just come from the garage where my bare chassis is sitting there on the floor while I work on other bits, could have measured it while I was there!
Dan_Trials
Well-Known Member
Went and dun it... 3.6 metres by 1.6 metres should do it. That's without front bumper or tow bar.
bushwwacker
Well-Known Member
Last edited:
Dan_Trials
Well-Known Member
12' x 5'6?..
. What is this "metric" thing you spout?!?!!??!!! ...
Force of habit from work.
No! I mean I'm youthful!
