Barbados · May 5, 2017

Hi Guys,

I have not taken a detailed look as yet, but just thought I would ask in case anyone here knows the reason why.

On my 97 300tdi 3 door landy, I realized that my left front wheel is about 2 inches inside the fender than the one on the right. I quickly measured the depth between the rotor on each side to the rim and both are the same.

Rims and tires are the same size too and wheels have no camber so wondering what can cause this.
The chassis seems straight and the landy was never in an accident, any ideas mates?

Thanks.

Grem · May 5, 2017

have you got a adjustable panhard rod...

soon sort that out hahaha

Saint.V8 · May 5, 2017

Jack the front axle up and grab the wheel and give it a wobble, if there is movement, it could be the swivel pins are badly warn causing the whole hub and swivel assembly to sit crooked on the swivel ball....

Barbados · May 5, 2017

Grem I dont think mine is adjustable, will double check.

Siant .V8, I know the previous owner recently did a swivel rebuild with the upper and lower bearings etc..but will still jack and check.

Thanks.

neilly · May 5, 2017

Saint.V8 said:
Jack the front axle up and grab the wheel and give it a wobble, if there is movement, it could be the swivel pins are badly warn causing the whole hub and swivel assembly to sit crooked on the swivel ball....

As above, if it is "tucked" in, Do you mean the top is angled inwards ? from your OP, it does almost read as if the whole wheel is inboard by a few inches, which would be well bizarre................

Barbados · May 5, 2017

neilly said:
As above, if it is "tucked" in, Do you mean the top is angled inwards ? from your OP, it does almost read as if the whole wheel is inboard by a few inches, which would be well bizarre................

The whole wheel is inboard Neilly, thats why I mentioned no camber. If the swivel has play or the pan rod bushes are bad, it will have camber/tilt. I do know its bizarre.

The only logical way for this to happen is if the body is sitting offset on the chassis or if the chassis is bent...

Cheers

Saint.V8 · May 5, 2017

My.....if the whole wheel in inboard that is an issue!

Does the opposite wheel have a spacer fitted and the 'inboard' one has been refitted without it?

Barbados · May 5, 2017

Saint.V8 said:
My.....if the whole wheel in inboard that is an issue!

Does the opposite wheel have a spacer fitted and the 'inboard' one has been refitted without it?

No, thats why I measured from the brake disc to the rim while the wheels are on.

Barbados · May 5, 2017

Cant physically see the chassis being bent but I will pull a line to check both sides.

Dippypud · May 5, 2017

Is the shocker pooped ?

Barbados · May 5, 2017

Dippypud said:
Is the shocker pooped ?

No, I dont think so, it has a fairly new HD kit with 2" lift.

I will try to track it down, going to check on the turret etc.

jamesmartin · May 5, 2017

Barbados said:
The whole wheel is inboard Neilly, thats why I mentioned no camber. If the swivel has play or the pan rod bushes are bad, it will have camber/tilt. I do know its bizarre.

The only logical way for this to happen is if the body is sitting offset on the chassis or if the chassis is bent...

Cheers

panhard rod locates front axle laterally lifting or lowering chassis will move axle,have both wheels the same offset

jamesmartin · May 5, 2017

Dippypud said:
Is the shocker pooped ?

how would that have an effect on a beam axle

Paul D · May 5, 2017

Barbados said:
The whole wheel is inboard Neilly, thats why I mentioned no camber. If the swivel has play or the pan rod bushes are bad, it will have camber/tilt. I do know its bizarre.

The only logical way for this to happen is if the body is sitting offset on the chassis or if the chassis is bent...

Cheers

The Panhard Rod moves the complete axle, which wouldn't show any differences measuring between similar parts on each side of the axle. Measure from the rotors to the chassis each side.

pete1987RRC · May 5, 2017

Rotor? = brake disc?

If they are the same it could be axle location or the wheel arch is bent.

Barbados · May 5, 2017

pete1987RRC said:
Rotor? = brake disc?

If they are the same it could be axle location or the wheel arch is bent.

Yep as in rotor, used to the US calling it brake disc.

Barbados · May 5, 2017

Well guys I feel like a fool. One of my work guys jacked up the Landy to paint the chassis unknown to me, I have not taken down the jack as yet but almost sure this is the reason. Since the Landy is lifted 2 inches, the tilt angle will be higher allowing the body to hang over the wheel more.

Silly feeling but happy, will still look at it again when the Landy is down.

Thanks for all the replies and pointers...you guys helpful as usual.

Cheers.

Barbados · May 5, 2017

The landy has a Brit Part HD 2" lift kit on it, rides like its on the rims, hard and nasty. I do intend to low bed 10ft X5 ft single axle tow a trailer on and off, wondering if I can go with something milder.

Dippypud · May 5, 2017

jamesmartin said:
how would that have an effect on a beam axle

I was free-wheeling an idea about suspension locations, I know if the spring mounts rot they can move, but was not thinking ...

Al2O3 · May 5, 2017

You mean you were wondering why the wheel was in an unusual position when it was jacked up in the air!

I think someone needs some time in the naughty corner.

Active Member

Attachments

Active Member

Dyed-in-the-wool 100% RR Junkie

Active Member

Well-Known Member

Active Member

Dyed-in-the-wool 100% RR Junkie

Active Member

Active Member

Never Knowingly Understood

Active Member

Well-Known Member

Well-Known Member

Old, nackered 'n broke, but the Landy is fine . :)

Well-Known Member

Active Member

Active Member

Active Member

Never Knowingly Understood

Well-Known Member

Similar threads