MikeyT, are you using / requiring a driver on your pwm? Just thought as you running the led's but also at high output? I didn't know if it was standard practice? :confused:

Im looking into making a similar lighting system for my landy, however I was thinking of making 4 x 30 W led spotlights possibly with these: 30W Cree XPE LED Emitter 30 Watts Light Warm White 3500lm Cold White 3900lm [BY-CR30W-WH] - US$17.99 : Topledlight
I can get the body machined ( although I'm interested in how you've mounted your led, straight on the alu or have you mounted it slightly off? ) but I'm unsure whether making these is a good idea or if I should just buy some halogens for the mo?? :fencing:
Thanks
 
100w LED !!!!!

I have 4 18W LED work lamps on my roof bar and thats like daylight, loads better than the 4 halogens i have before and a lot less current being drawn. They were less than £20 each as well :D
 
100w LED !!!!!

I have 4 18W LED work lamps on my roof bar and thats like daylight, loads better than the 4 halogens i have before and a lot less current being drawn. They were less than £20 each as well :D

Where the hell did you unearth them for 20 squid each?! :eek: :confused:
 
Nope rectangular ones

1379492_604844239573531_1602932585_n.jpg


havent tested them out and about yet as the landy hasnt made it off the drive since fitting them but this will give you an idea.

1266852_584096908314931_1580595769_o.jpg
 
Got me thinking about led's now, then about heat sinks, now I'm thinking about casting my own housing/heat sink!
 

Similar threads