stevebrookman
Well-Known Member
Morning all,
Have had an intermittent fault with my EAS for about a year. After driving for well over an hour it throws up an error. The fault was 2 "pressure signal constantly high".
Being me and not having the fault for over 6 months I didn't bother having a look until the weekend (towing the caravan next week).
Was going to change the pressure sensor on the valve block but chickened out of removing the valve block to get at it so close to the holiday.
I then cleaned all connections using contact cleaner.
It seems to throw a fault when everything is nice and warm. I was wondering if leaving off the EAS cover (if it's not raining) would result in all the electronic components running a little cooler.
Any comments would be graetly appreciated.
Cheers
Steve
Have had an intermittent fault with my EAS for about a year. After driving for well over an hour it throws up an error. The fault was 2 "pressure signal constantly high".
Being me and not having the fault for over 6 months I didn't bother having a look until the weekend (towing the caravan next week).
Was going to change the pressure sensor on the valve block but chickened out of removing the valve block to get at it so close to the holiday.
I then cleaned all connections using contact cleaner.
It seems to throw a fault when everything is nice and warm. I was wondering if leaving off the EAS cover (if it's not raining) would result in all the electronic components running a little cooler.
Any comments would be graetly appreciated.
Cheers
Steve