can anyone tell me seal kits for the item arrowed? I am not sure what this is (overdrive?) but it is leaking and I would like to re
IMAG0168.jpg
place gaskets etc
 
Do you have an overdrive lever beside the handbrake? In the photo there's no lever going to the unit. All that you can see is the handbrake linkage. If no lever it looks like a PTO of some kind. The top is cracked looking at the photo.
 
Doesn't look like a Bearmach either. Thought there was a crack on the top, probably just the oil.
 
Those top covers usually have a cork gasket, personally I'd use a bit of RTV sealant once the mating services are nice & clean
 
Have you checked the transfer box oil level as if its low the oil in the transfer box could be going into the O/D and coming out of the top of the O/D, had this on my last 2a but was due to my speedo being well out ( driving too fast on motorways ) :(
 
Have you checked the transfer box oil level as if its low the oil in the transfer box could be going into the O/D and coming out of the top of the O/D, had this on my last 2a but was due to my speedo being well out ( driving too fast on motorways ) :(

Is that even possible in a series? LOL
 
It is with an Ashcroft transmission fitted, was doing 70 when the speedo was saying I was doing 60 towing a trailer tent from Manchester to St Austel in Cornwall the missus was following behind with satnav
 
Clean off. Remove plate. Clean mating surfaces. Make gasket ,refit using gasket and Hylomar.
 

Similar threads