Jason2 Well-Known Member Dec 1, 2012 #1 Got a leaking snorkel on a 200 tdi between the snorkel wing plate and the air filter ! Got a new pipe but need to know how you get access to the plastic bit on the inside of the wing ?? Heater Matrix out ? Inner wing ?? Cheers Jason
Got a leaking snorkel on a 200 tdi between the snorkel wing plate and the air filter ! Got a new pipe but need to know how you get access to the plastic bit on the inside of the wing ?? Heater Matrix out ? Inner wing ?? Cheers Jason
sypher Well-Known Member Dec 1, 2012 #2 Its a bit of a pain in the ass i find . you can get to it by either removing your arch extention and getting to it under the arch that way and heater box out the way is still a fiddle but if you got small ish hands you might be ok .
Its a bit of a pain in the ass i find . you can get to it by either removing your arch extention and getting to it under the arch that way and heater box out the way is still a fiddle but if you got small ish hands you might be ok .
3.5 efi Well-Known Member Dec 1, 2012 #3 Jason2 said: Got a leaking snorkel on a 200 tdi between the snorkel wing plate and the air filter ! Got a new pipe but need to know how you get access to the plastic bit on the inside of the wing ?? Heater Matrix out ? Inner wing ?? Cheers Jason Click to expand... have you tried removing wing top vent and air funnel for heater box?
Jason2 said: Got a leaking snorkel on a 200 tdi between the snorkel wing plate and the air filter ! Got a new pipe but need to know how you get access to the plastic bit on the inside of the wing ?? Heater Matrix out ? Inner wing ?? Cheers Jason Click to expand... have you tried removing wing top vent and air funnel for heater box?
Jason2 Well-Known Member Dec 1, 2012 #4 3.5 efi said: have you tried removing wing top vent and air funnel for heater box? Click to expand... Tried that and I took all the bolts out for the heater box but the bastid still would'nt budge Got a proper bad leak as the last time I went through "the deep stuff" I nearly killed me engine !!! Thanks all the same to you both
3.5 efi said: have you tried removing wing top vent and air funnel for heater box? Click to expand... Tried that and I took all the bolts out for the heater box but the bastid still would'nt budge Got a proper bad leak as the last time I went through "the deep stuff" I nearly killed me engine !!! Thanks all the same to you both
Jason2 Well-Known Member Dec 2, 2012 #6 dave18 said: Still got the drain bung on the intake ??? Click to expand... Might have ! But as I can't get to it I wunt know !
dave18 said: Still got the drain bung on the intake ??? Click to expand... Might have ! But as I can't get to it I wunt know !
Jason2 Well-Known Member Dec 8, 2012 #7 Well going to have to sort it now as my heater matrix is fooked ! Found this LandyTown :: Defender heater matrix removal in Pictures
Well going to have to sort it now as my heater matrix is fooked ! Found this LandyTown :: Defender heater matrix removal in Pictures