I think i'm a proud new owner of a freelander freestyle td4, manual,2005, ok she has been around the block a few times 102k with a full LR servive history and the lady that owened it before kept ocd amounts of paperwork witch in turn is very handy for peeps like myself.
the only additional works carried out during servicing are:-
2009 new front discs+pads,
2009 new clutch master cylinder,
2010 new rear diff oil seal,
There does appear to be a few issues that i would like your advice on,
Clutch pedal is low, but does not cause any problems atm, will try Joe's bleeding article.
EGR valve is full of crap, ordered egr bypass will fit asap and clean out the rest of the intake system while i'm at it.
At 1200 rpm ish, i have noticed a slight vibration sound in the cabin in all but top gear but its goes by 1400rpm ish, so its a second or two, and i think i noticed a small linier wobble in the gearstick, she runs as quite as a mouse other than that. My novice LR thoughts from reading LZ tells me i should be thinking of a new VCU+Damper+Bearings just to be on the safe side ?
The Demist on the rear window does not work, relay clicks but no clearing at all, will get volt meter out to check we have power ?
I welcome any help and advice you can offer to keep my freelandering experience as happy as possible.
Regards
Shor
the only additional works carried out during servicing are:-
2009 new front discs+pads,
2009 new clutch master cylinder,
2010 new rear diff oil seal,
There does appear to be a few issues that i would like your advice on,
Clutch pedal is low, but does not cause any problems atm, will try Joe's bleeding article.
EGR valve is full of crap, ordered egr bypass will fit asap and clean out the rest of the intake system while i'm at it.
At 1200 rpm ish, i have noticed a slight vibration sound in the cabin in all but top gear but its goes by 1400rpm ish, so its a second or two, and i think i noticed a small linier wobble in the gearstick, she runs as quite as a mouse other than that. My novice LR thoughts from reading LZ tells me i should be thinking of a new VCU+Damper+Bearings just to be on the safe side ?
The Demist on the rear window does not work, relay clicks but no clearing at all, will get volt meter out to check we have power ?
I welcome any help and advice you can offer to keep my freelandering experience as happy as possible.
Regards
Shor