J

jimbo1919

New Member

• Dec 31, 2011

• #1

hi there pepole i need some advise on my 90 the light are giving me a head ache the right hand one comes on then off and the left one not at all unless i bridge the two light fuse together any ideas please ??????????????

ps new to all this thanks jim :welcome2:

 

Last edited: Dec 31, 2011

khaos

New Member

• Jan 1, 2012

• #2

You mean you're sticking a wire from one fuse to the other? Is this a joke? The fuse has gone.

 

J

jimbo1919

New Member

• Jan 1, 2012

• #3

no pal not joking the fuse is fine check them all and all the earth s as well it"s the old 1986 fuse box on it the side light on the left side and light work and only the side light on the right so i brought the head lamp convestion kit for it .thinking it was just the bulb check all wires behind the lamp all seem to be fine as well then all off a sudden side light on left side goe"s out ( i checked the bulb) any ideas please thanks jim .

 

khaos

New Member

• Jan 1, 2012

• #4

Ok so you're saying that when you bridge across the 2 fuses inside the car both lights work?
If so the problem must be there is no supply to the fuse that doesn't work.

 

tacr2man

Well-Known Member

• Jan 1, 2012

• #5

You didnt use the intro section , and give no location , so where abouts are you as someone close might be able to assist , as trying to rectify wiring probs at a distance can be very trying , and seeing as you are just joining to ask a question might require more effort than some are prepared to expend :welcome2:

 

J

jimbo1919

New Member

• Jan 2, 2012

• #6

ow sorry hi all it jimbo landrovers i ve owned 3 200 tdi disco 1 x seires 3 hybrid on range rover chassis 2 x landrover 90 very new to this all help how do i do into thing amd i am from mansfield nottingham

 

storm99

Spreading Joy & Harmony

• Jan 2, 2012

• #7

Indicator stalk.

 

Jason2

Well-Known Member

• Jan 2, 2012

• #8

I had this problem on an old glass fuse box as every thing was oxidised up !! cured it with a set of new fuses and cleaned the brass/copper fuse holders up with emery cloth

 

J

jimbo1919

New Member

• Jan 2, 2012

• #9

i was going to do that next weekend will let you no thanks james