dag019

Well-Known Member

• Mar 1, 2015

• #1

I have the following parts from a SWB Series III. I got them all as part of a job lot of parts and these are the pieces I did not need for mine. I am open to offers on all of the parts with collection from Warwick or forum relay. I will post pics as soon as it stop raining long enough to go out and take some.

Front axle, complete - £80
Rear axle, complete -£80
Gearbox and transfer box - £100
Rear tub - £80
Deluxe bonnet, with wheel mount plate - £60
Hard top and van sides - £100
Rear door - £40

 

monkfish24

Well-Known Member

• Mar 3, 2015

• #2

Im interested in the gearbox. Is it working?

 

dag019

Well-Known Member

• Mar 3, 2015

• #3

monkfish24 said:

Im interested in the gearbox. Is it working?

Click to expand...

I have never had it in a vehicle, it came with a pile of spares I bought and only used some of. It turns freely and from memory selects all the gears, I will double check. I also don't really want to split it from the transfer box and would rather sell them together.

 

monkfish24

Well-Known Member

• Mar 3, 2015

• #4

Hello, I have no problems with taking the box and transfer together. The lay shaft bearings have gone in mine so either looking to replace or a reasonable gearbox and transfer box to rebuild which area of the country are you in?

 

dag019

Well-Known Member

• Mar 4, 2015

• #5

Ok that's fine I will check all the gears engage today and get back to you.
I am in Warwick but could meet you somewhere nearby that would be easier for you to get to?

 

L

Landrover77

Member

• Mar 5, 2015

• #6

got any wings?

 

dag019

Well-Known Member

• Mar 5, 2015

• #7

I have a pair of wings in blue with chequer plate tops, I will try and post some pics tonight

 

S

scottwebby

New Member

• Mar 5, 2015

• #8

Don't suppose you have a dash available?

 

dag019

Well-Known Member

• Mar 6, 2015

• #9

scottwebby said:

Don't suppose you have a dash available?

Click to expand...

I do have a second dash but it wont be available until after I have fitted a Galv bulkhead just in case any parts of my current dash are not salvageable.

 

dag019

Well-Known Member

• Mar 7, 2015

• #10

monkfish24 said:

Hello, I have no problems with taking the box and transfer together. The lay shaft bearings have gone in mine so either looking to replace or a reasonable gearbox and transfer box to rebuild which area of the country are you in?

Click to expand...

I have pulled it out the shed this afternoon and the sector seems to have seized from storage, however i did not have any oil with me to try and loosen it up. But it would be good for a rebuild and is complete. PM me if you are still interested.

 

dag019

Well-Known Member

• Mar 7, 2015

• #11

Landrover77 said:

got any wings?

Click to expand...

I have dug around in the shed and actually have two sets of wings. I have taken some pictures if you pm me your email I will send you some of both paris.