Mikey0141

Member
Hi there , been
On before regarding air suspension faults , just
A wee update ...changed so far ... 2 front airbags (rips in both ) x 4 new level sensors (2 Broken ) , front valve block (cracked) . Recalibration of sensors , riding at correct height for 3 days ... then the rear raised to high rest point n now front doesn’t move from lowest point ??? Any
Ideas guys ... if not I’m going to have to bite the bullet and put it onto the garage
 
Hi there , been
On before regarding air suspension faults , just
A wee update ...changed so far ... 2 front airbags (rips in both ) x 4 new level sensors (2 Broken ) , front valve block (cracked) . Recalibration of sensors , riding at correct height for 3 days ... then the rear raised to high rest point n now front doesn’t move from lowest point ??? Any
Ideas guys ... if not I’m going to have to bite the bullet and put it onto the garage

Have you a diagnostics tool? Something like the GAP11D BlueTooth jobber? It would be very handy to be able to see live data and clear any faults and errors, some diagnostic tools will allow calibration and resetting so they are a very good investment.

You could look on the LZIR (landzone international rescue) map to see if you have someone local with a scanner that could take a look for you and maybe lend a hand if needs be.
 
Hi , sorry I forgot to say , I have a snap on diag tool (cleared compressor fault and height sensor faults Also angle sensor and any ABS faults ) , also I replaced the piston ring in compressor and seal , and checked the whole air system for leaks removing all trims underneath and using soapy water to detect any , none as of yet !
 

Similar threads