bertone902
Member
Anyone else had problem with tdv6 shredding belts? This is the 3rd belt in 6 weeks . Changed tensioner with the belt but still doing the same . Everything runs fine for about 2 weeks then it's sliced and wrapping round fan again
bertone902
Member
Only one that's got movement is the power steering pump I believe it is. Its inly s tiny amount though 
Datatek
Well-Known Member
As above, or the belt was fitted incorrectly one groove out so that the edge of the belt was running on the pully rim
I'd start the engine without a belt and check the crank pulley fir movement aswell.
Has any other work been done to it recently?
Has any other work been done to it recently?
Have you checked all the idler pulleys as well, normally any doubt all the tensioners and pulleys are changed out especially if you don't know their age. Any squeaks, bearing noise or play should be eliminated.
Hi, @bertone902 , out of curiosity what year is ur RRS and have u had the oil pump changed at any point plse
was the tensioner a genuine Land Rover one and new bolts fitted plse
indeed something doesn’t look right , will just double check some workshop notes I have
was the tensioner a genuine Land Rover one and new bolts fitted plse
indeed something doesn’t look right , will just double check some workshop notes I have
Last edited:
doh, bless u for letting me know , removed them to save confusion until I find the correct pics,
thks again
