Hi to every one.
Vehicle is a Freelander series 1 with the L series 2ltr Rover engine fitted. Has anyone ever fitted the L series engine from the Rover car?
If so are there any issues with mating the Freelander g/box to the car block?

As you probably guessed, I've fitted the engine but don't seem to be able to bolt the g/box up.

I ran out of light but intend to make a template from the gearbox and see if it will actually mate up,,,,hope so but I'm not holding my breath.

Stefan

Still looking for any advice

as far as i know theres an adapter (cant remember the correct name) plate on your original engine.

I think you are missing the adapter plate. Engine wise, the rover cars with the L series engine had a different advance curve on the pump, giving slightly less low end torque but a more satisfying kick and lump of torque when you stamp on the gas higher up the revs.
The freelander L series had a different curve, so the torque comes in sooner but ends earlier.