kim_lombard
New Member
Hello, I have a 2003 Freelander KV6 Petrol. I am getting P0306, P0304, P0301, etc. 78,000 miles.
After resetting the codes, it starts and runs fine for 5 to 10 minutes. Then when accelerating away from a stop it throws the errors. At the same time the Fuel Status on my scanner changes to OL-Fault (open loop fault).
I have new plugs, inspected coils for arcing, wires, etc. Fuel pump has a new filter.
It runs strong and well until the error pops up, then runs rough (obviously because its misfiring)
Any suggestions?
Thanks for you time, in advance.
After resetting the codes, it starts and runs fine for 5 to 10 minutes. Then when accelerating away from a stop it throws the errors. At the same time the Fuel Status on my scanner changes to OL-Fault (open loop fault).
I have new plugs, inspected coils for arcing, wires, etc. Fuel pump has a new filter.
It runs strong and well until the error pops up, then runs rough (obviously because its misfiring)
Any suggestions?
Thanks for you time, in advance.