Obiwan

New Member

• Mar 9, 2007

• #1

I know this has probably been done to death, but Im new to these parts and havent trawled through the pages as yet.

I have a 2000 Freelander Xdi, and it makes a good awful knocking rattle noise which appears to be coming from somewhere by the OS rear wheel area, it only does it when easing off juice before braking, and when you depress clutch it stops, so if when coming to a junction if I slow down by going down the gears no problem, but if I let it slow down itself all hell breaks lose back there.

It has had a new viscous coupling put on only last week

HELP PLEASE

 

greenjeepster

New Member

• Mar 9, 2007

• #2

does it have a hub cap? May have a stone or something inside it.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Mar 9, 2007

• #3

Kinell kinobee, cud be ya diff mount?

and welcome - yu shd be at home here - we have a few intergalactic wierdos.

 

greenjeepster

New Member

• Mar 9, 2007

• #4

If that is a no go put it up on jack stands and have somebody get it up to speed and then let off, while you try and pin point the noise. If you use somebody you don't like, like maybe somone from this forum! When they get it up to speed you can kick it off of the stands and call the insurance company

 

ming

SPACE TWOT

• Mar 9, 2007

• #5

greenjeepster said:

If you use somebody you don't like, like maybe somone from this forum! When they get it up to speed you can kick it off of the stands and call the insurance company

Click to expand...

gulp. . . . .titter , dont do it the jeepsters jist jokin, fink flippy hat man is on the mark. . . .

 

cashybai

New Member

• Mar 9, 2007

• #6

Any whining Obi? failing that it could be any of these:

http://www.landyzone.co.uk/lz/f9/rear-diff-oil-check-what-size-key-38457.html

http://www.landyzone.co.uk/lz/f9/prop-shaft-centre-bearings-38454.html

http://www.landyzone.co.uk/lz/f9/anti-roll-bar-link-replacement-38366.html

http://www.landyzone.co.uk/lz/f9/clunking-noise-38266.html

http://www.landyzone.co.uk/lz/f9/freelander-vcu-37990.html

http://www.landyzone.co.uk/lz/f9/rear-diff-checking-38054.html

http://www.landyzone.co.uk/lz/f9/front-suspension-thud-37492.html

http://www.landyzone.co.uk/lz/f9/dodgy-freelander-title-transmission-problem-37516.html

http://www.landyzone.co.uk/lz/f9/front-diff-37420.html

http://www.landyzone.co.uk/lz/f9/freelander-bang-help-37317.html

http://www.landyzone.co.uk/lz/f9/clunking-noise-36662.html

Try that lot, there should be summat in there that may help.It does sound like a dif mount at first sight tho..with you there hatters, there are some right fruit bats here....and don't **** Slob off.......

 

Obiwan

New Member

• Mar 13, 2007

• #7

Diff mount bushes were worn so changed them, still no change, cv seems solid enough

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Mar 13, 2007

• #8

One thing that hasnt been mentioned is cracked subframe mount - usually front one - that mite be worth investigating, along with Cashews lengthy tombe.

 

Northern Irelander

Well-Known Member

• Mar 13, 2007

• #9

Dont forget Taipan's rattle ordeal, speaking of Taipan, anyone heard of him or did he sell up and move on

Obiwan - you just gotta get it up on ramps and have a look