if it is either of those 2 things would it be expensive?Drop Link or CV joint? Have a good look for anything loose under the front end
Take a look at the drop links see if there is too much play in them , also get under freelander and to the back of engine you will see the anti-roll bar . See if it moves about too much aslo there is stopers either end of the bar to stop it moving out and hittin the struts , sometimes the break off and let it move out . Mine was gone and just cut a big washer on 1 side and put it around the bar and held it in place with a jubile clip .
Can it not be done by just jacking the car up?No, you just need to take the pressure off the anti roll bar. Easier said than done if you don't have axle stands.
I live in Malaga in Spain, not many genuine or knowledgeable garages here unfortunatelyNot really, you would still have pressure on the bar. Where are you based?
I live in Malaga in Spain, not many genuine or knowledgeable garages here unfortunately