meat

New Member
Hi was wondering if anyone could help,just bought a freelander 2000 plate,starts fine and engine fine,when you take off thers this big thumping noise going right threw the lander,starts from the back somewere,when i increase the speed it dies down but still ther,when i slow down the thumping gets louder again,thers a service light on picture of lander pointing to like 7 0clock,anyone any idea.cheers
 
does it look like this
images
 
I would take the prop shaft off to see if that stops the thumping, check the joints and the VCU. The service light sounds like it could be the hill descent light, see if it is switched on.
 
I would take the prop shaft off to see if that stops the thumping, check the joints and the VCU. The service light sounds like it could be the hill descent light, see if it is switched on.
cheers mate al try that,dont kno what the vcu is al find out and the light is what you state just need to find were that is as i never got manuel,let you kno how a get on,cheers again.
 
What colour is the HDC lamp?

The thump could be the vcu mounts, or the rear diff mounts.

trans.jpg


Cheers

Blippie
 
What colour is the HDC lamp?

The thump could be the vcu mounts, or the rear diff mounts.

trans.jpg


Cheers

Blippie
cheers mate,the rear diff mount is were the prop shaft enters,is that correct mate,and if so removeing the shaft would that solve it,i was thinking if it was that, the back drive shaft enter it as well so driveing on 2 wheel drive would that still not create the same noise.
 
Removing the propshaft would not necessarily stop the rear diff from thumping if the mounts were worn.

Cheers

Blippie
 
Removing the propshaft would not necessarily stop the rear diff from thumping if the mounts were worn.

Cheers

Blippie
I thought that mate,ive not got the right tools and am working on the ground,wer the back end of shaft enters i cani get they wee star bas...ds aff,if i was to remove that rear diff what else do i have to do,IE drive shafts,anything else and would i need to remove the prop shaft if i went that root,the noise i was getting i would say it would be comeing fe rear diff,cheers
 
just get a bar or a big screwdriver in around the bushes and check if theres any play in em, why start stripping a car if theres no need:doh:
theres also a mount to the body as well that can snap. have a search on here m8. theres loads of stuff on here about all your problems:D
 

Similar threads