Is there anyone running these on their 110?
http://www.4x4tyres.info/750x16-kingpin-retread--tyre-hilander-retread--tyre
http://www.4x4tyres.info/750x16-kingpin-retread--tyre-hilander-retread--tyre
top drive
Well-Known Member
2 years ago i bought a set of 33 king pin amazon ATS for my frontera
they were ****e - 8 months in - cracked to **** round the tread-tyre interface - not only that 2 of the exploded when my mrs mounted an average kerb at 20mph avoiding a **** pulling out - never happened on the odd occasion ive done the same with the bfgs i had on before ..... put bfgs on my landy when i rebuilt it ....
they were ****e - 8 months in - cracked to **** round the tread-tyre interface - not only that 2 of the exploded when my mrs mounted an average kerb at 20mph avoiding a **** pulling out - never happened on the odd occasion ive done the same with the bfgs i had on before ..... put bfgs on my landy when i rebuilt it ....
300bhp/ton
Well-Known Member
My brother has a set of these. They are a true 7.50 tyre, which is nice in this day and age. And well priced too. They are moderately tall for a 7.50, not the tallest, but not the shortest either.
The diamond pattern is very good off road and will excel on some terrain. The likes of BFG make nothing even close to the same ability off road.
If you use them on the road a lot, you'll simply wear the edge off the lugs and reduce their off road potential. But that is true of any aggressive MT.. That said they are perfectly fine compared to other MT's of similar nature for road use. Remember what they are when it's wet and don't expect the quietest ride. But again no worse than most other aggressive MT's.
As they are a proper 7.50, they'll fit better on a 6.5j rim. They will go on a 7j, but it'll stretch them out a little.
Turboman
Mab An Gov
I wouldn't diss all remoulds myself. Had good usage out of them, the better ones are fine. I have Insas and Fedimas in use at the moment, and getting good service out of them.
Same as anything else, there is good and bad. Havent heard the very best about Kingpin though, cheap and cheerful end of the remould market, I suspect.
Same as anything else, there is good and bad. Havent heard the very best about Kingpin though, cheap and cheerful end of the remould market, I suspect.
XRIZLAX
Active Member
Is this the guy from near Bradford?
If its the same guy I picked up 5 from him earlier in the year for £240
300bhp/ton
Well-Known Member
£48/each inc VAT & delivery for a 7.50. sorry I call BS on this one. If you can arrange the same deal for me, then I'll believe you.
