you sound like me
i need a life
i need a life
andyfreelandy
Well-Known Member
If it is 45secs off the car don't waste your time or risk your transmission by putting it back on!!!
Hippo
Lord Hippo
VCU bench test results in the link in my signature and link below. Bottom section of that post.
https://www.landyzone.co.uk/land-rover/vcu-torque-test-results.109486/page-13#post-2141449
Be careful when comparing against videos on vcu's from reconners who advise they losen them off to reduce stress in the transnission.
A "lose" VCU will turn quicker, making you think yours which takes a lot longer is faulty. My videos and results come from genuine GKN built, untampered vcu's.
https://www.landyzone.co.uk/land-rover/vcu-torque-test-results.109486/page-13#post-2141449
Be careful when comparing against videos on vcu's from reconners who advise they losen them off to reduce stress in the transnission.
A "lose" VCU will turn quicker, making you think yours which takes a lot longer is faulty. My videos and results come from genuine GKN built, untampered vcu's.
andyfreelandy
Well-Known Member
Looks like you used a bar about 1/3 length of the wheel up test and got similar readings to wheel up test for a given weight. So 1/3 bar length and similar times or same length bar and 1/3 time for off car testing??? Not easy to measure short times so shorter bar gets my vote.
Hippo
Lord Hippo
Eye used a shorter bar as eye did mine by putting a long screw driver through the uj. Few will have kit to put a full size bar on so my option makes it easier to DIY copy. Screw driver through uj pointing up and a thin metal tube over it from the other side, which holds the weight. Max weight eye went to was about 26kg.
Hippo
Lord Hippo
Results int link posted above and below. Also int me signature. Read said post. It's at the bottom
https://www.landyzone.co.uk/land-rover/vcu-torque-test-results.109486/page-13#post-2141449
