Stuballsed

Stuballsed

New Member
Hi All, dumb question comming:)

Just fitting some forged Jate rings to me 90. Just realised the chassis box section is wider at the front than the rear.

The rings fit sung at the front but are a good 10mm to 15mm wider than the rear. Is this right? Are there two different sizes or do the rear ones just swing about???
 
just leave em as they are. But if you do use washers make sure you space them equally on both sides of the chassis.
 
I did hear some years ago that you should never tighten jate rings too tight, they should hang loose...i dont remember what the reason was..but i remember thinking, thats good advice...someone with less alcohol induced brain damage will probably remind me..
 
Bloody great, ask a question about jate rings and you all start discussng the color of a Landy as the fukin sun goes down:doh:

Has anyone had this issue with jate rings and what did you do, or am i the only who has ever bought them:confused::D

And stay on topic you flippin wanderers you:rolleyes:
 
buy forged ones and the answer to the others definitely maybe pack it with penny washers perhaps
 
You must log in or register to reply here.

Similar threads

R
Lashing rings
Replies
2
Views
390
rubix101
R
archwayanimal
Replacement 1/4 rear chassis
Replies
2
Views
469
archwayanimal
archwayanimal
300bhp/ton
P38A ABS reluctor rings????
Replies
8
Views
2K
Grrrrrr
Grrrrrr
adyw
Rear suspension Sag
Replies
11
Views
669
adyw
adyw
ChrisBduck
3.6L Land rover 90
Replies
2
Views
843
ChrisBduck
ChrisBduck