kurgan · Aug 9, 2012

TO ALL JAP SPEC V8 DISCO OWNERS - i HAVE FOUND A SUPPLY OF SECOND HAND POST CATALYTIC TEMP SENSORS PART NUMBER (AMR 2463) IN NEW ZEALAND.

DONT KNOW COST AS YET BUT SHOULD NOT BE TOO EXPENSIVE.

THESE ARE NO LONGER MADE BY LAND ROVER AND NO LONGER AVAILABLE TO PURCHASE BRAND NEW. ONLY ORIGINALLY AVAILABLE FROM LR JAPAN

DOES ANYONE ELSE APART FROM ME REQUIRE A REPLACEMENT SET?

PLEASE PM ME IF SO REQUIRED.

CRAIG

auf_wiedersehen_pet · Aug 9, 2012

Bugger - I've got an ex Jap 300Tdi.......

janderson41 · Aug 9, 2012

This has just brought up a question from me about my Jap 300Tdi auto.
Still fitted with the original Cat converter
After 16 years should i be getting rid of it because:-

is it doing any good after this time or will it be choked up solid?

Any suggestions folks or do I just carry on

cheers

Jim A.
-------------------
1996 300Tdi auto (Jap reimport)

auf_wiedersehen_pet · Aug 9, 2012

janderson41 said:
will it be choked up solid?

No idea but mine went years ago!

kurgan · Aug 9, 2012

auf_wiedersehen_pet said:
Bugger - I've got an ex Jap 300Tdi.......

I don't know if they are across both models. I can find out.

Junder · Aug 9, 2012

Are these jap discoveries the ones badged as Hondas?

auf_wiedersehen_pet · Aug 9, 2012

Junder said:
Are these jap discoveries the ones badged as Hondas?

Honda Crossroad - No.

Mine is (was) a fairly low spec '95 300Tdi - indistinguishable from a UK model apart from a radio that didn't pick up UK freqs. Now fitted with a 2.8TGV.

2006 - Imported

2012 - Still being modified

Mark L · Aug 9, 2012

Damn, that's a smart bit of kit you've got there!!

auf_wiedersehen_pet · Aug 10, 2012

Mark L said:
Damn, that's a smart bit of kit you've got there!!

Thanks Mark. It is (and always will be) an ongoing project.

Currently, the bumper is off to put in jacking tubes and so I can fit a full width Allisport intercooler - I'll put pics on here.

crazymac · Aug 10, 2012

janderson41 said:
This has just brought up a question from me about my Jap 300Tdi auto.
Still fitted with the original Cat converter
After 16 years should i be getting rid of it because:-

is it doing any good after this time or will it be choked up solid?

Any suggestions folks or do I just carry on

Bin it, slap a straight through pipe in, it makes no difference to emmissions.

Then weigh it in with a scrappy for between £60 and £120!! Job done.

auf_wiedersehen_pet · Aug 10, 2012

auf_wiedersehen_pet said:
No idea but mine went years ago!

crazymac said:
Bin it, slap a straight through pipe in, it makes no difference to emmissions.

Then weigh it in with a scrappy for between £60 and £120!! Job done.

I wish I'd weighed mine in - would have paid for the replacement pipe.

KiwiTDI · Aug 10, 2012

Auf weisersen pet

I bought a disco cos my hilux surf is rubbish at towing the wifes Horse Trailer
After seeing yours I'm wondering if I can get away with modding the disco to look like yours now....all in the interest of making it a better tower of course .

auf_wiedersehen_pet · Aug 10, 2012

KiwiTDI said:
Auf weisersen pet

I bought a disco cos my hilux surf is rubbish at towing the wifes Horse Trailer
After seeing yours I'm wondering if I can get away with modding the disco to look like yours now....all in the interest of making it a better tower of course .

Go for it!

Do it in stages so she doesn't realise it.

KiwiTDI · Aug 10, 2012

I might have to make the shed it lives in bigger in stages as well :doh:

kurgan

Active Member

auf_wiedersehen_pet

Well-Known Member

janderson41

Active Member

auf_wiedersehen_pet

Well-Known Member

kurgan

Active Member

Junder

New Member

auf_wiedersehen_pet

Well-Known Member

Mark L

Well-Known Member

auf_wiedersehen_pet

Well-Known Member

crazymac

Active Member

auf_wiedersehen_pet

Well-Known Member

KiwiTDI

Active Member

auf_wiedersehen_pet

Well-Known Member

KiwiTDI

Active Member

Similar threads