rushie · Feb 20, 2011

Anyone point me to a supplier where i can get stainless steel J Nuts for the door hinges without buying the full bolt kit??
Thanks

instantsquid · Feb 21, 2011

Let me google that for you

wickford90 · Feb 21, 2011

instantsquid said:
Let me google that for you

Would you now order them, pay for them and forward them on to mr rushie as he is far to busy himself.

instantsquid · Feb 21, 2011

I'm on it

Badger · Feb 21, 2011

instantsquid said:
I'm on it

I'll have 2 whilst your at it Ian

instantsquid · Feb 21, 2011

Sorry, you're far too capable to receive my assistance.

rushie · Feb 21, 2011

ive been searching for ages but not found any ... so good luck with the google search, looks like the zinc ones will have to do

The Mad Hat Man · Feb 21, 2011

dint try very hard - did ya

?

J Nuts > Fasteners > Hall-Fast Industrial Supplies Ltd. - Newark, Nottinghamshire

bustersbus · Feb 21, 2011

rushie said:
ive been searching for ages but not found any ... so good luck with the google search, looks like the zinc ones will have to do

Did ye click the google link?

The Mad Hat Man · Feb 21, 2011

bustersbus said:
Did ye click the google link?

No - i looked for myself.

Am independant - me

bustersbus · Feb 21, 2011

The Mad Hat Man said:
No - i looked for myself.

Am independant - me

Snigger

rushie · Feb 22, 2011

thx ... i looked at them ages ago but they looked nothing like the ones i took out of my landy ... so presumed they were the wrong ones :doh:

thx again

meego · Feb 22, 2011

The Mad Hat Man said:
dint try very hard - did ya ?

J Nuts > Fasteners > Hall-Fast Industrial Supplies Ltd. - Newark, Nottinghamshire

I am sure you will correct me if i am wrong

but I don't think that is what he is looking for. He needs a captive nut, not a J Nut.

bustersbus · Feb 22, 2011

rushie said:
thx ... i looked at them ages ago but they looked nothing like the ones i took out of my landy ... so presumed they were the wrong ones :doh:

thx again

Are ye on about the things in here?...

http://www.landyzone.co.uk/lz/f41/removing-door-hinges-bulkhead-113396.html

bustersbus · Feb 22, 2011

meego said:
I am sure you will correct me if i am wrong but I don't think that is what he is looking for. He needs a captive nut, not a J Nut.

Was just thinkin' that mesel'

bluehaze · Feb 22, 2011

Just bought some new ones from;

stig fasteners

40p each I think

rushie · Feb 22, 2011

ye there the bad boys

LeadFarmer · Feb 22, 2011

I know we all like the idea of stainless steel bolts etc, but doesnt stainless have an even more harmful reaction with aluninium than standard steel bolts? So they might not rust, but will corrode the aluninium instead?

bustersbus · Feb 22, 2011

LeadFarmer said:
I know we all like the idea of stainless steel bolts etc, but doesnt stainless have an even more harmful reaction with aluninium than standard steel bolts? So they might not rust, but will corrode the aluninium instead?

Aye, but not where the doors bolt onto... they're steel

LeadFarmer · Feb 23, 2011

bustersbus said:
Aye, but not where the doors bolt onto... they're steel

What about where the bolt passes through the alluminium skin of the door?

Guess its only a tiny area. Could always wrap tape around the thread or dip the thread in some Duralac?

New Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads