Buz
Active Member
Bought a new radio for my LR90 that has had a TD5 dash fitted....or so the seller told me. The centre has an orifice not quite big enough for the radio so thought i'd take that out and enlarge said orifice! Right, eventually got the 2 lower screws out and now seems to be fixed some way at the top.......further investigations and it seems this dashboard is pretty sh1te......I'm now thinking of ripping dash out and obtaining a replacement.
The LR is an 87 vintage so I don't know what the original would have been and how much of what I have is original or TD5 bodge?
What will fit if I replace it?
The speedo is incorrect as the engine has been changed so I could change all that out as well.
Does anyone have a link to a thread/website where it shows step by step how to to it.....i can fumble my way through it all but there is bound to be a logical way of doing it!!
Any advice appreciated!
Forgot to mention it has had a TD5 bulkhead fitted!!
Well, I bought it as a bit of a project and it doesn't seem to be letting me down so far!!!
The LR is an 87 vintage so I don't know what the original would have been and how much of what I have is original or TD5 bodge?
What will fit if I replace it?
The speedo is incorrect as the engine has been changed so I could change all that out as well.
Does anyone have a link to a thread/website where it shows step by step how to to it.....i can fumble my way through it all but there is bound to be a logical way of doing it!!
Any advice appreciated!
Forgot to mention it has had a TD5 bulkhead fitted!!
Well, I bought it as a bit of a project and it doesn't seem to be letting me down so far!!!
Last edited: