The door issue has buggered off!! o_O
The compressor is doing well tho:D

Can you adjust the switches ?, we use a similar type at work and adjust, then superglue them to set them ....

Sounds like yours change with temperature so a thou or so may make them not function ...
 
Can you adjust the switches ?, we use a similar type at work and adjust, then superglue them to set them ....

Sounds like yours change with temperature so a thou or so may make them not function ...
Good moaning!
The issue came and went in one evening, I can't help thinking it was humidity related and I'm not convinced it's the end of it but fingers crossed for the moment :D
 
Did you take the door card off Mark? I take it you checked the connector plug/s the older latches have two one purely for the ground.make sure they're clipped out of the way of the window regulator.if you have the later latch does the loom connect directly to it or has it got a small loom as part of it? I've got a box of latches in the garage which I was going to send to Marty until Covid hit I could have a look later,got to take the Boss to the Doc's now. Check the earthing points, which I'm sure you have done.
 
Did you take the door card off Mark? I take it you checked the connector plug/s the older latches have two one purely for the ground.make sure they're clipped out of the way of the window regulator.if you have the later latch does the loom connect directly to it or has it got a small loom as part of it? I've got a box of latches in the garage which I was going to send to Marty until Covid hit I could have a look later,got to take the Boss to the Doc's now. Check the earthing points, which I'm sure you have done.
I've not been near it tbh Alan, but your suggestions amongst others fall not upon deaf earso_O;)
Thanks for your help peeps:D
 

Similar threads